HVAC Coils and Humidification
Implementing solutions for difficult and sophisticated configurations.
From a single simple small system to high-volume complex and large facilities, we strive to provide solid and cost-effective solutions for our customers.
Carel Humidification
Carel Humidification leads the evolution of control technology and humidification for air conditioning and refrigeration. Carel’s products support customers with the most efficient energy savings solutions.
The unit can be used with both potable and demineralized water when wanting to minimize periodical cleaning. Ideal for humidifying technological or medical environments, where maximum steam purity and extended maintenance-free operation are required. The range of models runs from 4.4 to 132 lbs/hr per hour.
The operation of immersed electrode humidifiers is based on a very simple physical principle. As common drinking water contains a certain quantity of dissolved mineral salts, and is consequently slightly conductive, applying a voltage to metal electrodes immersed in the water creates an electric current that heats the water (Joule effect) until boiling, thus producing steam.
The quantity of steam produced is proportional to the electric current, which is, in turn, proportional to the water level. The range of models runs from 3.3 lbs/hr to 287 lbs/hr per hour.
Humidify and save! Works on potable mains water and demineralized water from reverse osmosis. The gas-fired humidifier that is installed like an ordinary heating system. Efficiencies of 92-96% with modulation of 25 to 100% with ±2% precision on set point. Models available for nominal 100, 200 and 400 lb/hr of steam.
Significant energy savings by minimizing condensation and reducing the heat lost in the AHU/duct. Uses steam from a pressurized system or produced by a humidifier. Short non-wetting distance (even ≤ 0.5 m). The unit has been designed to be made “to measure” for the AHU/duct. Steam flow-rates are: multi-pipe models 132-2440 lbs/hr, single-pipe models 44 to 308 lbs/hr.
